Freeman 23 ‘Alachua’

Construction
GRP moulded hull and painted GRP topsides, alloy and rubber fendering, stainless steel pulpit and cockpit rails, sliding and fixed windows, timber grab rails, blue fabric folding pram hood, stainless steel and chromed deck fittings. Last antifouled and hull polished in March 2025

Accommodation
An aft cockpit with rear bench seating, storage locker and tank access beneath, helm to port with seat, folding canopy and screens, double cabin doors to starboard.
The accommodation comprises a conventional 4 berth layout with twin V berths at the bow with storage beneath and a ventilation hatch above, starboard side WC compartment with Thetford cassette toilet, port side full height locker with a folding door that creates a partition between the saloon and forward berths, port side dinette that converts to a double berth, storage beneath and access to the engine, a galley to starboard with storage lockers, sink with cold water tap and two ring gas burner. The interior is typical Freeman with varnished wood finishes, stainless steel framed sliding windows, blue upholstered seating and cushions, carpet & curtains.

Engine
Ford Watermota Sea Wolf petrol engine coupled to a shaft drive via a J type gearbox with helm mounted throttle and foot controlled gear lever. Temperature and voltage meter at the helm.

Equipment
Thermostatically controlled Propex HS2000 LPG warm air cabin Heater
70amp split charge Diode
1100GPH Bilge Pump
3.9kg Popane Calor Gas Bottle with regulator
Fire Extinguishers
Fire Blanket
Kiddie Carbon Monoxide Alarm
Thetford Porta Potti Casette
Thetford two - burner gas stove

Electrics
1 x 12v 68Ah battery, cabin lighting, spot light, horn, navigation lights, screen wiper, bilge pump, domestic water pump.
240v - Shore Power connection, fuse panel, battery charger, sockets.

Disclaimer
Whilst every care has been taken in their preparation, the correctness of these particulars is not guaranteed. They are intended only as a guide and they do not constitute a term of any contract. The Vendor does not make or give, and neither the Broker nor any person in its employment has any authority to make or give, any representation or warranty in relation to this vessel, in respect of which any Purchaser must rely on his own inspection. A demonstration of the vessel will be conducted once a Sale and Purchase Agreement has been signed by both the seller and buyer and a 10% deposit has been paid into the broker's client account.